Sip Posted November 30, 2005 Report Share Posted November 30, 2005 I couldn't be happier with how they turned out. Here is one before picture and a few after pics. They are 4" round LEDs that I got off of ebay for $30. Before: http://s93725736.onlinehome.us/sip/jeep/led_before_tn.jpg After: http://s93725736.onlinehome.us/sip/jeep/led_3_tn.jpg http://s93725736.onlinehome.us/sip/jeep/led_1_tn.jpg http://s93725736.onlinehome.us/sip/jeep/led_2_tn.jpg (click for bigger) Quote Link to comment Share on other sites More sharing options...
MosJan Posted November 30, 2005 Report Share Posted November 30, 2005 look's good Sip jan vor lav sovores k@toghnem NIva'i vra el dnes Quote Link to comment Share on other sites More sharing options...
vava Posted November 30, 2005 Report Share Posted November 30, 2005 Just looking at your pics made me regret asking you the question HERE Quote Link to comment Share on other sites More sharing options...
vava Posted November 30, 2005 Report Share Posted November 30, 2005 The lights look great BTW. Quote Link to comment Share on other sites More sharing options...
Sip Posted November 30, 2005 Author Report Share Posted November 30, 2005 (edited) Thanks! Replied to you over there as well. But yah, those tires on the jeep are not the greatest on snow or in mud. But they do GREAT on rocks (Goodyear MT/R). Edited November 30, 2005 by Sip Quote Link to comment Share on other sites More sharing options...
MosJan Posted November 30, 2005 Report Share Posted November 30, 2005 Sip jan i don't see the Reverse lights - what will you be doing for that ?? Quote Link to comment Share on other sites More sharing options...
Sip Posted November 30, 2005 Author Report Share Posted November 30, 2005 (edited) I bought a couple of small 55W fog lights from Walmart for $14.99. I am going to mount those on the tire carrier and wire up to the reverse light wire with a relay. THe reason I haven't done it yet is because I need to pull a power wire from the battery because the lights draw a lot more juice than the stock wires can handle (they'll melt). So those will be done this weekend I think I'll actually just ziptie those lights to the spare carrier ... they are really small and light. I dont' care if they are stolen since they are so cheap ... I also don't want to mess with drilling into the bumper. I was tryin to find lights that fit behind the "W" cut into the corners of the bumper ... but I couldn't find anything good. Maybe later I will put some marker lights in there ... I am also thinking about putting a couple of smaller LED lights on the sides of the quarter panels ... I may also have to think about lighting the license plate but I doubt the cops will hastle me for that. Edit: By the way, the round LED's I have in there now are "3" state ... they are off, dim (normal driving with lights), or bright for blinking/braking. All I had to do was to short a pin on the flasher to keep it from flashing fast (it was thinking the bulb is "burnt") but overall, it was a VERY easy install. The only thing I had to do was cut a 4.5" hole with a hole saw and they fit perfectly Jeeps are sooooo easy to work on! Edited November 30, 2005 by Sip Quote Link to comment Share on other sites More sharing options...
MosJan Posted November 30, 2005 Report Share Posted November 30, 2005 Sip see this link http://www.stu-offroad.com/electrical/led2/led-1.htm Quote Link to comment Share on other sites More sharing options...
MosJan Posted November 30, 2005 Report Share Posted November 30, 2005 I was tryin to find lights that fit behind the "W" cut into the corners of the bumper ... but I couldn't find anything good. Maybe later I will put some marker lights in there ... I am also thinking about putting a couple of smaller LED lights on the sides of the quarter panels ... I may also have to think about lighting the license plate but I doubt the cops will hastle me for that. http://www.stu-offroad.com/electrical/led2/image027.jpg Quote Link to comment Share on other sites More sharing options...
Sip Posted November 30, 2005 Author Report Share Posted November 30, 2005 That site is great. I actualy followed the writeup they had on there on relocating the charcoal canister a bit (it's behind the passenger side quarter panel)... on mine, I just had to put a couple of washers behind the bolts to move it about 1/4" ... and the LED cleared just fine. That's the other good thing about jeeps ... there is sooooo much information on the web for doing stuff like this! Quote Link to comment Share on other sites More sharing options...
MosJan Posted November 30, 2005 Report Share Posted November 30, 2005 Sip also see http://www.ultraleds.co.uk/default.php?osC...f292ba87500f14d super bright LED Lights - you can find them in USA also you can make teh W by using the LED lights - all you need is the LED's and Template of W mad out of none conductive material ( plastic ) and some free time Quote Link to comment Share on other sites More sharing options...
Sip Posted November 30, 2005 Author Report Share Posted November 30, 2005 Wow those are nice. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.