Leaderboard

My new crossover steering kit is DONE! The only problem I had was that the inside edge of my wheel on the passenger side would rub against their bracket. Mostly, the balancing weights were the ones making contact but clearance is very tight there. Before and after: http://s93725736.onlinehome.us/sip/jeep/new_steering_lo.jpg (click for bigger) Here is where the contact was: http://s93725736.onlinehome.us/sip/jeep/new_steering_rub_lo.jpg (click for bigger) I busted out the grinder and made that notch on the bracket: http://s93725736.onlinehome.us/sip/jeep/new_steering_fix_lo.jpg (click for bigger) And here is the pic after grinding and painting with the wheel back on: http://s93725736.onlinehome.us/sip/jeep/new_steering_fix2_lo.jpg (click for bigger) So far so good. Went for a quick test drive and looks like everything is in order. I'll have to get an alignment but looks like my eyeballing toe adjustment ain't too bad Probably the hardest part of the whole thing, other than figuring out how to deal with this problem was getting the old pitman arm off. I didn't have a pitman arm puller so I tried to force it ... let's just say after several hours I now have a pitman arm puller